Adding a Tint Over Tinted Car Windows: Good or Bad?
Tinted car windows are the best option if you value your privacy. However, some people have been questioning whether it is safe for their car to add an extra layer of tint on top. In this article, we'll address your frequently asked concerns regarding tint over tinted car windows and if it's good or bad for your vehicle.
Can You Put Tint Over Existing Tint?
Yes, it is possible to apply tint over existing car window tinting. Small bubbles are natural, but they will go away if there are any. Just make sure the new tint is applied on top and not the bottom, which is the least likely to be affected by the previous coat. If you get a high-quality car window tint and very good tinting services to carry out the application, then it's good to go.
Are Their Perks to Two Layers of Tint?
Tinting car windows with two layers of tint serves several purposes. Having a heavier tint can truly offer you and your passengers some added privacy. Plus, it will give your window an extra layer of protection from the sun's heat, block and reflect some of the UV rays that damage your car's interior, and protect your leather seats.
How Can You Get Two Layers of Tint?
There is a process to undergo before you can get the perks of two-layered window tinting. Here's a peek into what to expect:
1. Find Window Tinting Services
First of all, you need to browse for window tinting services. A professional must be in charge of the project, as they have the knowledge of how to layer the tint on top. They may also suggest stripping the existing window film before you apply the new one, depending on the quality of the old one.
2. Skip the Car Wash Visits
After applying two layers of tint, it's best to skip having your car washed for a while as the film needs to cure. If you have a tint layer over your tinted car windows and it's all dry, use a soft microfiber cloth to clean them. Even if you wash your car weekly, you'll still be able to keep the tint looking good for years to come.
3. Deal with Window Tint Bubbles
As mentioned, some bubbles might occur when you apply two layers of tint, but they will disappear on their own. These are usually small bubbles caused by the sealant. They can be dealt with by squeezing and flattening them down after the tint dries or bringing the bubble issue to the attention of your window tinting professionals.
4. Allow the Tint to Dry and Cure
After applying your new layer of tint, allow it to dry completely first. Curing the film will make the tinted car windows last longer and keep their shine. This will ensure the second layer of tint won't peel off as easily as the first one. Curing the window tint after each coat is advisable, but don't forget that curing inhibits the drying process.
Conclusion
With so many vehicle tinting alternatives, you may also discover a new approach to have your vehicle's privacy without any visible faults. If you want well-tinted vehicle windows, find a reputed service and have your car tinted by professionals.
In need of car window tinting in Clovis, CA? Cen Cal Tinting is Fresno's most trusted auto restyling shop, offering window tinting, paint protection film, and more. Get in touch with us now!
Take a look at our results.
What our customers think
Had our 2025 Tesla Model 3 tinted by Cen Cal Tinting and the whole experience was top notch. The quality of the work speaks for itself — super clean install, no bubbles, and the heat rejection is noticeable right away. What really made it stand out though was the customer service. You can tell they really care about their work and their customers. Highly recommend Cen Cal Tinting if you want it done right.
Took my Camry in for a i3 ceramic all around plus the air ceramic for the front windshield. Very pleased how it turned out. Highly recommend them. They are very professional and scheduling with them was very easy. And plus, they give you a lifetime warranty on their films.
This is my 4th car along with several referrals I have brought to this company to work on my vehicles. They have done a fantastic job on each one of them. On this particular one they did 15% tint over the factory tinted glass and 35% on the sides with a 5% windshield strip. Looking forward to all my future cars to this company. They typically complete the job in a few hours and are very connected via text message.
We Are Here To Help
We specialize in window tinting, paint protection film (PPF), ceramic coating, paint correction, and vehicle wraps. Whether you’re looking for heat rejection, gloss enhancement, or full protection, we’ve got you covered.
Absolutely. Many customers drop off their cars before work or leave them overnight. Just let us know what works best for your schedule and we’ll accommodate.
We’re located in Clovis, CA, and proudly serve Fresno and the surrounding Central Valley. Our shop is easy to find, and we’re just minutes away from most parts of Fresno.
You can call, text, or request a quote online in under a minute. We’ll just need your vehicle year, make, model, and what service you’re interested in to get you an accurate estimate.
We recommend booking an appointment to avoid wait times, but walk-ins are welcome when we have availability. Feel free to call or text us to check for same-day openings.
Yes — we recommend giving your car a basic exterior wash before your appointment. This helps us avoid rubbing dry dirt or dust into the paint when working on your vehicle, which can cause scratching. It also makes it easier for us to get great photos of your car when it’s all done!
Yes! We offer buy now, pay later options through providers like Affirm, Afterpay, and others — so you can split your purchase into easy payments. Just ask us for more details when booking.
We work on nearly all types of vehicles, including cars, trucks, SUVs, Teslas, luxury, and exotic cars. It’s rare that we come across something we can’t work on — but if you have a unique vehicle, feel free to reach out and we’ll be happy to confirm.
